Our Products
Product Features
►Evaporation vessel made of SS AISI 316L stainless steel
►Toroidal coil heat exchanger made of A-316L stainless steel (for condensation)
►Control panel displays all operating data
►Power input 380V.III.50HZ
►Immersed heat exchanger (for evaporation)
►Main compressor for heating and cooling refrigerant (Freon R407c or R134a)
►Siemens PLC control and touch human-machine interface
►Can work in conjunction with CM activated carbon system
►Parts of the machine in contact with liquids are made of special corrosion-resistant materials (SAF2205, SAF 2507 or titanium) (for wastewater treatment containing high chlorides)
►Remote control regulator for remote monitoring
Working principle
Product Parameters
|
Parameter |
Daily processing capacity |
Total power |
Ton energy consumption |
Length |
Width |
High |
|
Unit |
l/d |
kWh |
kWh/m³ |
mm |
mm |
mm |
|
LT-0.2T |
200 |
1.8 |
100 |
1510 |
900 |
1900 |
|
LT-0.6T |
600 |
4.7 |
100 |
1860 |
1100 |
2100 |
|
LT-1T |
1000 |
6.4 |
100 |
2100 |
1300 |
2300 |
Optional Equipment
1,Inorganic Nanofilm Ceramics
Technical Patameter
Inorganic membranes have many advantages, such as high separation efficiency, stable effect, good chemical stability, acid and alkali resistance, organic solvent resistance, bacteria resistance, high temperature resistance, pollution resistance, high mechanical strength, good regeneration performance, simple separation process, low energy consumption, easy operation and maintenance, and long service life.
|
Item |
Size |
Weight |
Power |
Processing capacity |
|
ECO-I |
L*W*H:1200x700x1750 |
125Kg |
1.1Kw |
90L/h |
|
ECO-II |
L*W*H:1600x900x1900 |
175Kg |
3Kw |
270L/h |
2,PH Adjustment Device
Technical Patameter
The whole machine adopts an integrated design, which is easy to install and operate. Users only need to connect the mixer and dosing pump to the appropriate ports, and the instrument can automatically control the pH value in the water, saving manual operation.
|
Item |
Unit |
Specification |
Item |
Unit |
Specification(A/B) |
|
Size(W*D*H) |
cm |
180*85*175 |
Metering Pumps |
V |
380 |
|
Weight |
kg |
120 |
L/Min |
0.4 |
|
|
Power |
V |
380(Three-phase) |
W |
60 |
|
|
Volume |
L |
300 |
Gear motor |
V |
380 |
|
Filter tank material |
PVC |
W |
370 |
||
|
On/off time control |
4 Steps |
rpm |
23 |
||
3,Oil Removal Equipment
Technical Patameter
After the first-level filtration, the equipment will settle and skim the oil, and then filter and remove water in the second level. The equipment will settle, filter and skim the oil in one unit. The sediment will be discharged regularly, and the floating oil will be skimmed into a collection barrel for outsourced disposal.
The removal of floating oil is conducive to the long-term stable operation of the supporting evaporator equipment sensors and heat exchangers.
