Maintenance And Upkeep Of Continuous Crystallizer

The main equipment of the continuous crystallizer is a static equipment with a low failure rate, unless corrosion leakage occurs due to improper material selection.
Common troubleshooting points for continuous crystallizers include:
1. Continuous external cooling crystallizers require regular cleaning of the heat exchanger to eliminate the accumulation of scale layers.
2. The machine seal cooling water for pumps and bottom mixers needs to be maintained at a regular time and be soft water.
3. The pump with a leaking mechanical seal needs to be replaced with a backup pump in a timely manner.
4. The crystallization tank should be kept insulated and cleaned as much as possible after the anniversary of operation.
5. The upper part of the liquid surface of vacuum crystallization may form scars, and it is necessary to regularly open the flushing medium for flushing.
6. Pay attention to the changes in system vacuum level. When the vacuum level is insufficient, check whether the condenser is scaling or whether the cold source is sufficient.