Horizontal Solid Liquid Separation Centrifuge

ENLLW Horizontal Solid liquid separation centrifuge, the suspension enters the filter chamber between the drum and the spiral through the feed pipe, and enters from the bottom of the drum cone. Under the action of centrifugal force, the liquid phase in the slurry is filtered out through the filter screen inside the drum, and the solid phase is trapped in the drum. At the same time, the solid phase moves from the small end of the drum to the large end under the action of centrifugal force and the differential speed between the spiral and the drum.

As the drum rotation diameter increases, the centrifugal force also increases, and the trapped solid phase reaches the minimum moisture content from the initial high moisture content to the minimum moisture content when discharged from the drum, realizing the automatic and continuous separation of the solid and liquid phases.

A washing pipe is configured to wash and purify the filter cake in the later stage of filtration. A thinner filter layer can achieve better washing effect and lower detergent consumption.

For materials that are prone to secondary crystallization, a steam pipe can be configured to perform high-temperature cleaning on the products in the inner cavity according to the set cleaning cycle.

● The drum cone angle can be selected as 20 or 40 degrees according to the working conditions

● The filter can be selected as a metal plate mesh or a wedge mesh

● Frequency control, stepless adjustment of the drum speed

● Multiple lubrication methods: grease lubrication (standard), oil lubrication, oil-gas lubrication

● Fully automatic refueling device

● High-precision drum (CNC machining, high-precision balancing), high separation factor, improve separation efficiency

● Set the main shaft seal to effectively prevent material from flowing

● Combined transmission belt

● Speed sensor

● Automatic cleaning program: feed pipe cleaning, washing pipe cleaning, drum outer cleaning, machine cover inner surface cleaning, discharge hopper cleaning

● The system is fully enclosed to meet the requirements of clean production

● Multiple protections: over-vibration protection, cover opening protection, motor overload protection, nitrogen protection, static grounding protection, maintenance password lock

●Smaller cone angles can achieve better washing results

●Larger cone angles can achieve greater processing capacity

●Choose the appropriate cone angle based on material characteristics

● Wedge mesh made of trapezoidal wire with straight edge b, longer wear failure cycle

● With minimum mesh gap a=0.05mm

● Select suitable materials according to materials and working conditions: 304, 316L, 2205, C22, C276

● Hardened trapezoidal wire has better wear resistance

● Feed pipe with backwash

Suitable for materials that are easy to clog in the pipeline, and backwash to clear the pipeline when it is blocked

● Screw feed device

Suitable for materials with high solid concentration and poor fluidity